Publicité
APPLIANCE MAINTENANCE
WARNINGS
Isolate the cooker from the electricity supply before attempting to
replace the oven lamp.
The oven lamp used is of a special type withstanding high
temperatures. To replace it, act as follows: disassemble the
protecting glass (A) and replace the burnt lamp with one of the
same type. Reassemble the protecting glass.
E 14
25 W - 230 V~
T300°C
A
DISASSEMBLE OF WORK-TOP
In case it is necessary to repair or replace the inside components,
act as follows:remove the glass lid from its position slipping off it
upwards.
Remove the grids, remove burners and flame-spreaders (see
fig. 3), unscrew the visible screws “V” placed on the work-top (see
fig. 4). Disassemble the work-top by unscrewing the 4 rear screws
“A” (see fig. 5 ).
V
Fig. 3
Fig. 4
A
Fig. 5
- To disassemble the control panel, unscrew the 4 internal screws
(B) fixing the control panel to the oven face ( fig 6 ).
Fig. 6
36
B
9
Publicité
