CAME PS BARCODE Série Mode D'emploi page 134

66
CUSTOM KPM180 PRINTER cleaning
Warning! Regular cleaning of the device maintains print quality and prolongs
its life over time. The table below shows the recommended cleaning
schedule.
Cleaning schedule
EVERY PAPER CHANGE
Printer head
Rollers
EVERY 5 PAPER CHANGES
Cutter
Paper route
Sensors
EVERY 6 MONTHS OR WHEN NECESSARY
Bodywork
When using the device in environments with high levels of dust, cleaning should be performed more
frequently.
Warning! Cleaning operations are to be performed with the power supply
cable disconnected from the printer.
Cleaning the sensors and paper route
• Open the printer cover, pushing the opening lever.
• Clean the sensors on the device and the area involved in the paper passage using
compressed air.
WARNING! Do not use alcohol, solvents or a hard brush. Ensure no
water or other liquids penetrate the interior of the device.
PS BARCODE - Maintenance guide
Use compressed air or pincers
Use compressed air or a soft cloth
Use isopropyl alcohol
Use isopropyl alcohol
Use compressed air
Use compressed air
ON