CHIEF KITEC Série Instructions D'utilisation page 15

Installation Instructions
Installing Transitional Cover
1. Maneuver transitional cover (C) so that it is able to wrap
around lower part of extension column. (See Figure 29)
2. Wrap transitional cover (C) around lower part of extension
column. (See Figure 29)
3. Press transitional cover (C) into the base of upper part of
extension column until the transition cover clicks into
position. (See Figure 29)
(C)
(KITEC Series shown)
Figure 29
1
3
2
1
KITEC/KITMC SERIES
15