Maintenance Plan; Cleaning The Air Filter; Cleaning The Spark Plug - Zipper Maschinen ZI-HAEK4100 Mode D'emploi

After finishing the shredder work let the machine sufficient time to process the whole shredding
material. This avoids start-up difficulties when working next time!
To be shredded:
Hedge and tree cuttings, bushes, perennial herb, dead flowers
To be not shredded:
Glass, metal, plastic, plastic bags, stones, cloth, roots with soil, food left-overs, fish or meat.
14 MAINTENANCE
Shut off the machine, let it cool down, disconnect spark plug cap from spark plug!
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance
deficiencies can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.

14.1 Maintenance plan

Loose or lost screws, nuts, bolts
Damage of any part of the machine
Fuel level
Fuel tank of tightness
Machine cleaning
Oil level
Function of safety switch
Tension of the V-belt
Greasing of the blade drum
Cleaning spark plug
Cleaning air filter

14.1.1 Cleaning the air filter

A clogged air filter reduces the engines power output drastically and causes engine disfunction.
Furthermore it reduces the engines lifespan!
Disassemble the air filter cap. Remove the air filter from the machine. Clean the air filter and drip some
drops of oil onto the filter. Mount the filter back.

14.1.2 Cleaning the spark plug

Take off the spark plug cap. Loosen and remove the spark plug. Clean it with a small brush from soot
debris. The contact distance shall account approx. 0, 5mm – 0,7mm.
ZIPPER MASCHINEN GmbH
ZI-HAEK4100 / ZI-HAEK11000
No cleaning, upkeep, checks or maintenance when machine is running
N O T I C E
Controls for the maintenance of the machine
www.Zipper-Maschinen.at
A T T E N T I O N
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Every month
Regularly prior to each operation
Every 25 working hours
Every 25 working hours
Every 20-30 working hours
MAINTENANCE
36