Assembly; Delivery Content - Zipper Maschinen ZI-HAEK4100 Mode D'emploi

12

ASSEMBLY

12.1 Delivery content

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
ZI-HAEK4100:
ZI-HAEK11000:
12.2 Assembly
Some machine components are heavier than 20kg. Assembly only from min.
2 persons! Assembly only with engine switched off!
ZI-HAEK4100:
ZIPPER MASCHINEN GmbH
ZI-HAEK4100 / ZI-HAEK11000
www.Zipper-Maschinen.at
N O T I C E
Base foot:
Tilt the blades chassis slightly
backwards and fix the base foot with
four screws , washers and nuts M10.
ASSEMBLY
28