Air Inlet; Control Panel - Domo DO191A Mode D'emploi

DO-191A
or radios.
Keep appliance out of direct sunlight to avoid discolouration of casing. The appliance
should not lean more than 35°, do not place upside down during transport.
PARTS

1. Control panel

2. Cold air outlet
3. Infrared receptor
4. Remote control
5. Transport handles
6. Air outlet pipe

7. Air inlet

8. Additional drainage
9. Mains supply
10. Main drainage
CONTROL PANEL
Plug into mains socket, the appliance will produce a single acoustic signal.
Press the standby button ; the appliance is now switched on. The display shows
the room temperature, the appliance will work in automatic mode.
Select Mode
Press on the menu button to choose the mode from the menu below:
Adjust Temperature
The temperature can be set between 15°C and 31°C with an interval of 1°C.
Press once on the + or - button to increase or decrease the temperature by 1°C.
Adjust Ventilation Speed
Press on the ventilation button to adjust the ventilation speed from the menu
below:
28