Inside And Outside Temperature & Humidity - Renkforce 1208067 Notice D'emploi

• Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hour >
Minute > Year > Month > Date > Temperature unit > Rainfall unit > Wind Speed unit >
Pressure unit (hPa, mb, inHg, mmHg) > Pressure value > EXIT
• (Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hour >
Minute > Year > Month > Date > Temperature unit > Rainfall unit > Wind Speed unit >
Pressure unit (hPa, mb, inHg, mmHg) > Pressure value > EXIT)
• PLEASE NOTE: Setting the air pressure:
• The details about the sea level pressure are found in your local news or on a regional
website. You can enter this value in the setting mode. If you already know the absolute
pressure value of your location, you can also enter this into the setting mode. As
soon as the air pressure changes, the unit is reset and the current air pressure
measurement displayed, which is based on this first time entry of the air pressure.
• Please note that the manual change to the weather forecast automatically changes
the value of the air pressure measurement in the setting mode. Therefore we
recommend you carry out the setting of the weather forecast before setting the air
pressure.
• Press the BARO button (2) to specify the air pressure in the time display. The 6 hour
review of the air pressure appears as bar chart on the lower left side of the screen.
j) Inside and outside temperature & humidity
• Temperature and air pressure displays appear in the lower middle of the screen.
• Again press the Channel/+ button or the Search button (12) , to select the display
modes indoor , outdoor (default channel 1) (preset channel 1) or the auto channel
scrolling (auto channel search)
• To change the temperature unit:
.
63