Intended Use - Renkforce 1208067 Notice D'emploi

2. Intended use

The weather station displays the different measured values e.g. the inside/outside
temperature, the inside / outside moisture, the quantity of rain, the wind speed and
wind direction.
The measured data of the external sensors are transmitted by radio to the weather
station.
In addition the weather station calculates a weather forecast using an internal air
pressure sensor and recording of the air pressure changes, which are indicated on the
display by graphic symbols.
Time and date can be set automatically using per DCF time symbol signal. However, a
manual setting is also possible (e.g. with reception problems).
The product is powered by batteries. The weather station can also be operated via an
external wall wart (not in the delivery scope, can be ordered as an accessory).
The manufacturer accepts no responsibility for incorrect displays, measured values or
weather forecasts and the consequences which can arise from this.
The product is intended for private use. It is not suitable for medical purposes or for
providing information to the general public.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting, fire,
electric shock etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
You can find a list of the product's features and characteristics in chapter 5.
43