LGB 25552 Instructions De Service page 16

CV62 Back-EMF: Max. Adjustment
(0: small, 255: max.)
Limits the total adjustment in motor voltage.
If there is a very large load on the motor,
the adjustment will not exceed this value -
for more realistic operations, so that locos
will slow a bit on grades.
CV67 Speed steps programmed by user
(see CV29):
to 28 speed steps are programmed in CV67
to CV94.
CV94 With LGB MTS, every second value is
skipped (14 speed steps).
Factory pre-set speed steps:
7, 9, 11, 13, 16, 20, 24, 28, 32, 36, 42, 48,
54, 60, 68, 76, 84, 92, 102, 112, 124, 136,
152, 168, 188, 208, 230, 255
Pre-set values for user-programmable
speed steps:
8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96,
104, 112, 120, 128, 136, 144, 152, 160,
168, 176, 184, 192, 208, 224, 240, 255
Hint: The speed steps are factory pre-set
and programming is not necessary. Use the
55045 MTS PC Decoder Programming
Module for programming.
16
(0..255) [255]
(0..255)