iKarus 6811003 Manuel D'utilisation page 19

- Always keep an eye on the flying helicopter to prevent it flying, landing or
crashing on or near your head, your body and any other people.
- Never disassemble or attempt to modify the product.It may damage the product
and cause danger.
- Never put your hands or face close to rotating parts. Doing so will create risk of
unexpected injury. To avoid such risk,never operate this product while sitting on
the floor or on a chair. Operate this product in a position, which will allow you to
quickly get out of the way if necessary.
- Always switch off both the flying unit and transmitter when leaving transmitter
is unattended. If the power switch is left on, it is possible that unintended stick
operation occurs, when the transmitter is placed on a floor or a chair.
- Never allow young children to use this product. Doing so will create the risk of
an accident caused by the rotating parts.
- To ensure safe operation never use in this product damaged parts or parts,
which have changed their shape.
Trimming:
The helicoter can be out of trim after some severe or multiple crashes, improper
storage or temperature changes, etc. You can simply solve this problem by following
the procedures below.
1. If the helicopter takes too much forward speed by itself.
Step 1:
Take the tail
between fingers.
2. If the helicopter take too much backward speed by itself.
Step 1:
Take the tail
between fingers.
Step 2:
Twist tail about 30
degree counter
clockwise .
Step 2:
Twist tail about 30
degree clockwise.
19
90°
Step 3:
Release.
90°
Step 3:
Release.