Storage; Preparation For Installation; Installation - Agilent Technologies TV70 Mode D'emploi

Storage

When transporting and storing the pumps, the following
environmental requirements should not be exceeded:

Preparation for Installation

The TV70 Navigator is shipped inside a special protective case; in
case of damage occurred during the transport, please contact the
local selling centre. Do not throw the case in the environment. The
material is totally recyclable in accordance with the directive CEE
85/399 for the environmental protection. INSTALLATION. Do not
install or use the controller in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk. During
operation, the following environmental conditions must be respected:

Installation

Do not install or use the controller in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk. During
operation, the following environmental conditions must be respected:
Controller TV70 Navigator User Manual / 87-900-956-01 (G)
temperature: from -20 °C to +70 °C
relative humidity: 0 – 95 % (non-condensing)
temperature: from + 0 °C to +40 °C
relative humidity: 0 – 95 % (non-condensing)
temperature: from + 0 °C to +40 °C
relative humidity: 0 – 95 % (non-condensing)
Instructions for Use

Storage

143/182
17