To Pair The Unit To A Wireless Phone - Audiovox VMO 5020 V Mode D'emploi

To Pair the Unit to a Wireless
Phone:
1. Access the wireless phone Bluetooth
function and set the Bluetooth function
to on.
2. Set your wireless phone Bluetooth
discovery mode to on.
NOTE: Some discovery modes have
a time limit before they are
automatically turned off.
3. Press the front panel PHONE button
or press the Main Menu Bluetooth
icon to access the Bluetooth Screen.
4. Turn Bluetooth on.
5. On the unit's Bluetooth Screen, press
the Device icon. A screen appears
showing a list of the mobile phones.
The device is now ready to search for
mobile phones:
6. Press the Search icon to look for new
phones if yours is not discovered
by the unit. Upon completion of the
search, the following screen appears:
7. Press the wireless phone identifier
that you want to pair. The following
screen appears:
8. Enter the passkey for the unit. The
default passkey for the unit is "1234".
Press the Enter (
9. At this point the wireless phone will
ask you to respond to a prompt similar
to "Pairing request from _______
Accept? Yes or No ". You should
answer Yes to the request.
10. Enter the passkey for the unit. The
default passkey for the unit is "1234".
The wireless phone and the unit
should pair.
97
) icon.