Pairing Your Wireless Phone; To Pair A Wireless Phone To The Unit - Audiovox VMO 5020 V Mode D'emploi

BLUETOOTH OPERATION

PAIRING YOUR WIRELESS PHONE

Before using Bluetooth functions, you
must pair your wireless phone and the
unit. Pairing is a special process used
when two devices connect for the first
time. The pairing process is used to gen-
erate a link key that is used for authen-
tication purposes for future Bluetooth
connections between devices. The unit
can pair five Bluetooth devices.
Your wireless phone can be paired
with the unit in two manners. The unit
can initiate the search for compatible
devices and pair to the wireless phone
or the wireless phone can initiate the
search and pair to the unit. The following
paragraphs describe both methods.
NOTE: The following procedures are
generic. Procedures for pairing
wireless phones vary slightly from
phone manufacturer to phone
manufacturer.
To Pair a Wireless Phone to the
Unit:
1. Press the front panel PHONE button
or press the Main Menu Bluetooth
icon to access the Bluetooth Screen.
2. Turn Bluetooth on.
3. Access the wireless phone Bluetooth
function and set the Bluetooth function
to on. (Please refer to the wireless
phone's instruction manual to enter
Bluetooth setup, turn Bluetooth on/off,
and perform pairing).
4. Use the wireless phone's add a new
device feature. A device or devices
will appear on your wireless phone
display.
5. A prompt to pair should appear on
your wireless phone. Accept the
request and initiate the process.
6. A prompt to enter a PIN number or
passkey for the unit should appear.
The default passkey for the unit is
"1234".
7. At this point a prompt stating pairing
successful should appear. The paired
device identifier appears on the
Bluetooth Screen. The wireless phone
and the unit have paired.
96