Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.3 Advantages of bre.Lux PowerUnit 2 at a glance!
Reliable polymerization (curing)
+ All light waves available
= Maximum penetration
= Top quality of the result
Unsurpassed polymerization speed
+ 72 LED lights (370 - 500 nm) + Full Range + Rotary plate + Light-Tray
(translucent object tray)
Long service life of the LED lights
+ 20.000 operating hours or 12 years
Reliable
+ Careful and gradual increase of the luminous power
+ Temperature (heat) control 45 ° - 65 °C
+ Overheat protection
+ Automatic deactivation of the light with acoustic signal at the end of the program
Ease of use
+ Easy and fast access to programs
+ Programmable to satisfy individual requirements
+ Spacious drawer
+ Extremly silent unit
+ Compact unit
2. Indication
Fixation and curing of light-curing dental materials.
3. Contraindication
Use other than for the purpose intended (see approved indications)!
4. Hazard and safety information
Signal word:
Described under items 4.1 Warning and 4.2 Attention.
Important information is marked with „Warning" or „Attention".
Warning
Indicates potential risks which may cause severe injuries or death in case of non-compliance.
Attention
Indicates potential risks which may cuse injuries or damage to the unit in case of non-compliance.
4.1 Warning
Damaged unit
Do not use damaged unit, if, for example the glass of the LED is missing or is damaged.
The light beam must never be directed towards exposed soft issue to avoid any injuries or irritations.
The light beam must never be directed towards the eyes.
Use other than for the purpose intended
• Do not use any fl ammable, explosive substanced in the unit!
• Do not heat up any food, liquids or small living animals in the unit!
• Do not reach with your fingers into the unit; always unplug the unit first.
• Do not touch the mains plug with wet fingers - risk of electric shock!
Unplug the unit before opening it!
15
Publicité
Chapitres
Table des Matières
