Foster 7380645 Manuel D'installation page 27

POWER LIMITATION SETTING
The appliance is generally configured to the maximum available power, shown in the technical data table.
However, an operating mode with power limitation can be set. In this way, the maximum power supplied by the hob is
limited to a fixed value.
The power limitation setting must ONLY be performed by a specialized technician.
To set the power limitation, do the following:
1. Connect the hob to the power supply.
2. Within two minutes, access the Service Menu by simultaneously pressing the
acoustic signal.
3. Press two illuminated slider cursors until you hear a second beep. The "Timer" display shows [CF6].
4. Press button. The "Timer" display shows [PHA].
5. Use slider control (left end  -, right end  +) to select desired power level. Selected level is shown on display of a
cooking zone.The correspondence between the power levels and limitation values are shown in table below.
6. To confirm selection and exit the Service Menu, press
To exit the Service Menu without making changes, press.
WARNING! The power level selected must be according to the fuses installed.
Power level chart
Model
0 (Default)
1
2
3
4
5
7380645 7381645 – 7381245 - 7382645
3700 W
2800 W
3500 W
-
-
-
and keys simultaneously.
7400 W
2800 W
3500 W
4500 W
6000 W
-
27
and keys until you hear an
7383645 7384645
11100 W 10400 W
2800 W 2800 W
3500 W 3500 W
4500 W 4500 W
6000 W 6000 W
7400 W 7400 W