Cycle Guide - Maytag YMEDX6STBW Guide D'utilisation

CYCLE GUIDE — SENSOR DRY CYCLES
SENSOR DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Not all cycles and settings are available on all models.
NOTE: Government energy certifications for the Maytag
drying temperature setting. The as - shipped defaults of Sensor Dry, Automatic Dry, Normal cycle, Low heat, Wrinkle Shield were not used.
Items to dry: Dryness Level:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you like,
select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
TIMED DRY - Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Items to dry:
Towels, bedding,
children's clothing
Any load
Rubber, plastic, heat
sensitive fabrics
CYCLE GUIDE — STEAM REFRESH CYCLE
Not all cycles and settings are available on all models.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Items to dry:
Any load Steam Refresh
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High or Santize temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low to Medium temperature setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
6
®
Temperature:
More Dry High
Normal
Energy Preferred
Less Dry
More Dry Medium or
Normal
Energy Preferred
Less Dry
More Dry
Normal
Energy Preferred
Less Dry
Cycle: Temperature:
Sanitize Sanitize
Freshen Up Any
Timed Dry Air Only
Cycle: Temperature:
High
Gas and Electric models were based on the Timed Dry cycle with the Maximum
Available
Options:
Signal
Wrinkle Prevent
or Control
Signal
Low
Wrinkle Prevent
or Control
Low Signal
Wrinkle Prevent
or Control
Available
Options:
Signal Extended high-heat drying cycle intended to help
sanitize items such as bedding, towels, and baby wear.
This cycle is not recommended for all fabrics. For best
results, run cycle to completion, do not interrupt.
Signal Use low to medium temperature to smooth out wrinkles,
such as those found in clothes packed in a suitcase or
in items wrinkled from being left in the dryer too long.
Signal No heat drying.
Available
Options:
Signal This cycle is best for reducing wrinkles and odors from
2 or more dry items. Cycle time will increase depending
on number of items.
Use the Air Fluff or Air Only (no heat) setting for foam, rubber,
plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Automatic cycles give the best drying in the
shortest time. Drying time varies based on fabric
type, load size, and dryness setting.
Select a drying temperature based on the fabrics
in your load. If you are unsure of the temperature
to select for a load, select the lower setting rather
than the higher setting.
Cycle Details:
Cycle Details: