Cycle Guide - Maytag MGDP475EW Guide D'utilisation Et D'entretien

CYCLE GUIDE — SENSOR CYCLES
Not all cycles and settings are available on all models.
SENSOR CYCLES - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Items to dry:
Jeans, heavy work clothes,
towels
Work clothes, medium weight
fabrics, sheets
Casual, shirts, pants,
lightweight items, synthetics,
delicates, athletic wear
CYCLE GUIDE — TIMED DRY
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle knob or
be a separate control.
Items to dry: Cycle:
Heavy or bulky items Heavy Dry
Any load Timed Dry
Rubber, plastic, heat Timed Dry
sensitive fabrics
These settings are added at the end of certain cycles to reduce wrinkling.
SPECIAL SETTINGS:
Any load Wrinkle Prevent
6
Cycle: Temp:
Jeans High
Energy Preferred Medium
Less Dry Low
Drying
Temperature:
Any
Any
No Heat
No Heat
Cycle Details:
Gives fabric the best drying in the shortest time. Drying time varies based
on fabric type, load size, and dryness setting.
Select a drying temperature based on the fabrics in your load. If you are
unsure of the temperature to select for a load, select the lower setting
rather than the higher setting.
Cycle Details:
Completes drying if items are still damp.
Dries items to a damp level for items that do not require an entire
drying cycle.
Select a drying temperature based on the fabrics in your load. If
you are unsure of the temperature to select for a load, select the
lower setting rather than the higher setting.
Use a no heat setting for foam, rubber, plastic, or
heat-sensitive fabrics.
After a cycle is complete, the load is periodically tumbled to avoid
wrinkles until you are ready to remove it.