Cleaning And Care - Gaggenau AH 900761 Notice D'utilisation Et D'installation

Cleaning and care

Fig. 12 Grease filter
Fig. 13
10
The grease filter saturation display F flashes after
operating 30 hours to indicate you that you should
clean the grease filter (see Fig. 2). It goes without
saying that the grease filter can be cleaned at any
time, even if the grease filter saturation display is
not flashing.
The metal grease filters can be removed easily for
cleaning (see Fig. 12):
Grip the handle rail of the grease filter and pull the
grease filter towards you out of the unit.
The metal grease filters can be cleaned in a dish-
washer at a maximum temperature of 65 °C
(149 °F), where it should be supported vertically to
allow food or residue to drain off.
Slight discolorations may occur when cleaning
metal filters in a dishwasher.
If possible, the inner parts of the housing should be
wiped out with hot water when replacing the filters.
The sound insulation mats can be cleaned easily.
Avoid using pointed or rough objects when cleaning
them.
After cleaning it, re-insert the grease filter in the
hood in the position from where you removed it.
The grease filter saturation display is reset by
pressing the F key. Flashing of the indicating lamp
goes off.
Note:
Activated charcoal filters do not contain any
polluting substances. They can be disposed of
through the normal refuse collection channels.