Cleaning And Maintenance; Technical Specifications - HQ Power VDL80FB Notice D'emploi

• Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
• Overhead mounting requires extensive experience : calculating work load limits, determining the installation
material to be used... Have the material and the device itself checked regularly. Do not attempt to install the
device yourself if you lack these qualifications as improper installation may result in injuries.
• Make sure there is no flammable material within a 50cm radius of the device.
• A qualified electrician should carry out the electric connection.
• Connect the device to the mains with the power plug. In general, lighting effects should not be connected to
dimming packs. Put the power switch in the ON position. The device will produce colourful light beams at a steady
pace.
• The installation has to be approved by an expert before the device is taken into service.

5. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, mounting supports and connections should not be modified or tampered with e.g. do not drill extra
holes in mounting supports, do not change the location of the connections...
3. The electric power supply cables should be undamaged. Have this device installed by a qualified technician.
4. Mechanically moving parts must not show any signs of wear and tear.
6. Caution
• Disconnect the device from the mains prior to maintenance.
• Use a moist cloth to clean the device and avoid the use of alcohol or solvents for cleaning purposes.
• This device does not contain any user-serviceable parts with the exception of the lamps. Refer to "a) Installing or
Replacing a Lamp" under "4. Installation" for further details.
• Spare parts should be ordered with your local dealer.

7. Technical Specifications

Power Supply
Power Consumption
Fuse
Dimensions
Weight
Lamp
Max. Ambient Temperature
Max. Housing Temperature
For more info concerning this product, please visit our website www.hqpower.com.
The information in this manual is subject to change without prior notice.
VDL80FB_v2
Procedure
230Vac/50Hz
max. 80W
5A/250Vac (5 x 20mm)
Ø200 x 150mm
0.8kg
2 x 230V / 40W JDC G6.35
45°C
130°C
5 VELLEMAN