Table des Matières
Publicité
Recommended separation distances between portable and mobile RF
The device is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the device
can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment
(transmitters) and the device as recommended below, according to the
maximum output power of the communications equipment.
Rated
maximum
���������������� 150������������
output
power
of
transmitter
(W)
0.01
0.1
1
10
100
separation distance ���� in meters (m) can be determined using the equation applicable to the
For transmitters rated at a maximum output power not listed above, the recommended
frequency of the transmitter, where ���� is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE
(1)
At 80MHz and 800MHz, the separation distance for the higher frequency range
applies.
(2)
These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
I-TECH LA500. Tous droits réservés. I-TECH LA500 et le logo
la propriété exclusive de I.A.C.E.R. Srl et sont enregistrés.
Édition : MNPG326-00 du 22/06/2020
IACER Srl
communications equipment and the device
Separation distance at transmitter frequency (m)
���� = 1,2 √����
�������� 800 ������������
0.12
0.38
1.2
3.8
12
���� = 1,2 √����
���������������� 80������������
�������� 800 ������������
0.12
0.38
1.2
3.8
12
31
���� = 2,3 √����
���������������� 800������������
�������� 2,7������������
0.23
0.73
2.3
7.3
23
sont
MNPG326
Publicité
Table des Matières
