Hotpoint Ariston SL B10 BDB Mode D'emploi page 18

it en
the correct position to allow lid closure.
Cleaning the filters (H)
The Pure Clean
maximum protection
maintains high air quality, as the air given back
by the appliance is entirely free from dust/
powder residues (filtering power > 99.95 %).
To clean the Pure Clean Hepa 13 filter (31):
1. Disassemble the air grill (33) using the opening
tab.
2. Remove the Pure Clean Hepa 13 filter by
releasing the opening tab.
3. Wash the filter under running water, taking care
that the jet of water is not too strong.
4. Hold it so that the water flows parallel to its folds.
5. Let it dry at room temperature until all its parts
are thoroughly dry.
6. Replace the Pure Clean Hepa 13 filter, paying
attention to the position of the notches.
7. Fit the air grill into its housing until it clicks into
place.
To clean the dust compartment filters (40):
8. Press the dust-compartment opening button (14)
to open the dust compartment lid (15).
9. Remove the Pure Clean dust bag (36), motor
filter grill (38) and motor filter (37) from the motor
filter grill.
10. Clean the motor filter by washing it under running
water, taking care that the jet of water is not too
strong. Then gently shake water loose.
11. When cleaning the motor filter grill, remove
any dust/powder residues with a small brush. If
needed, use a damp soft cloth.
12. Fit the motor filter into the motor filter grill again,
taking care to position it gently into the special
notches.
13. Slide the motor filter grill assembly into the
special guides in the dust compartment.
14. Fit the Pure Clean dust bag using the special dust
bag support.
15. Close the dust compartment lid until it clicks into
place.
ATTACHMENTS
The attachments can either be supplied as standard
features (based on the model) or be purchased
separately from Hotpoint authorised centres.
18
Hepa 13 filter ensures
against allergens
Multi brush/Multi Deluxe brush (J/I)
The Multi brush (3) is suitable for vacuuming hard
floor and carpets on a daily basis.
The Multi Deluxe brush (1) is designed optimizing the
and
air flow and is especially suitable for vacuuming hard
and smooth floors as well as carpets.
Use the bristle-adjustment pedal (2) to clean:
Hard floors
Carpets
Parquet brush (K)
The Parquet brush (4) is suitable for vacuuming
delicate areas such as wooden floors. The special
natural bristles enable you to use on very delicate
surfaces without harm.
Turbo brush (L)
The Turbo brush (5), with rotating bristles, is
especially suitable for the in-depth vacuuming of
short-pile carpets and removing pet hair. The special
antibacterial treatment prevents the proliferation of
bacteria. An arrow under the brush indicates where it
can be opened for dislodging trapped objects.
Deluxe Parquet brush (M)
The Deluxe Parquet brush (7) is suitable for
vacuuming delicate and parquet floors. The brush is
equipped with very delicate rotating bristles, which
are operated by the vacuum cleaner's suction power,
and soft wheels protecting delicate floors. To clean
the plastic parts of the Deluxe Parquet brush, remove
the brush from the metal extension pipe (9) and wipe
with a dry or slightly damp soft cloth. To clean the
rotating bristles, turn the safety lock into position and
remove, then disassemble the rotating brush and
start cleaning. Remove any hairs or threads that got
entangled using scissors, taking care not to damage
the bristles.
Upholstery brush (N)
The Upholstery brush (6) is suitable for vacuuming
surfaces such as sofas, mattresses, blankets,
cushions etc. It is equipped with rotating bristles
operated by the vacuum cleaner's suction power that
enable you to clean in depth and remove any fur, hairs
or mites from fabrics. The protection grill prevents the
bristles from touching the surfaces to be cleaned, thus
ensuring maximum on fabrics.