Camera Parameters; System Time - Security-Center PROFILINE TV7330 Instructions D'installation

9.7 Camera parameters

Here you can make general settings such as video signal synchronisation, automatic lens control,
time and display functions. The settings are as follows:
MISC MENU
EXT SYNC
AUTO IRIS
13
SYSTEM HOUR :
MIN:

SYSTEM TIME :

RETURN
1. Move the cursor to select MISC. Confirm your selection with ENTER.
2. From the submenu, select EXT SYNC. You can select the following settings with the
RIGHT/LEFT keys.
INT: Internal synchronisation with 50Hz
LINE LOCK: The video picture is synchronised with the voltage supply frequency.
Note: This function works in the 230V AC version only.
INT
DC LENS
IRIS WINDOW
17
00
DISPLAY
3. Select AUTO IRIS. You can select the following settings with the RIGHT/LEFT keys.
DC LENS: Setting for an auto-iris lens with DC control
VIDEO LENS: Setting for an auto-iris lens with video signal control
4. Select IRIS WINDOW and adjust the iris of the lens using the RIGHT/LEFT keys. (00-19).
The higher the value, the wider the lens iris opens.
Note: The wider the lens iris opens, the less clear the picture.
5. Select SYSTEM HOUR and MIN and enter the current time using the control keys.
6. Select SYSTEM TIME. You can select the following settings with the RIGHT/LEFT keys.
DISPLAY: The time is shown in the camera picture.
HIDE: The time is not shown in the camera picture, but the scheduled day/
night switchover remains active.
50