Security-Center PROFILINE TV7330 Instructions D'installation page 45

This submenu applies to PRESET mode:
Program the camera as follows:
PRESET MENU
WB FIX
INDOOR
RETURN
1. Select WB FIX with the cursor and set a colour temperature range using the RIGHT/LEFT
keys.
INDOOR / OUTDOOR / FLUORESCENT / USER SETTING (= setting as for
manual white balance). Confirm your input with ENTER.
3200K
9.4 Video picture setting (PICTURE)
This menu is used for the perfect setting of the video signal with the help of a video monitor or
oscilloscope. The settings have a strong impact on the video picture. The factory settings are
optimised for 80% of all applications. You are recommended to keep the factory settings. To
change the settings in the submenus, use the RIGHT/LEFT keys to navigate to the desired menu
item and then press ENTER. The following submenus are provided:
VIDEO: Here you can change the settings for the average chroma for improving the colour signal-
to-noise ratio, the colour depth (hue), the brightness, the pedestal (black level), the SPRS effect
and the SPRS gain.
PATTERN: Here you can define a pattern of colour scales to be supplied by the camera to the
monitor via a pattern generator.
APERTURE: Here you can fine-tune the vertical and horizontal lines, thus optimising the picture
clarity.
GAMMA: Here you can make a gamma correction to adjust the camera for different display types
(TFT monitor, tube monitor, etc.). This is made possible by an extended dynamic range with
knee switching.
45