Contrats De Licence Des Logiciels; Directive Weee - Siemens SIMATIC IPC1047 Instructions De Service

Pc industriel
Masquer les pouces Voir aussi pour SIMATIC IPC1047:
Table des Matières

Publicité

Normes et homologations

Contrats de licence des logiciels

Si l'appareil est livré avec un logiciel installé, respectez alors les contrats de licence
correspondants.
L'appareil possède les homologations suivantes :
● Underwriters Laboratories (UL) selon la norme UL 61010-2-201 Second Edition, File
E85972
● Norme canadienne CAN/CSA-C22.2 No. 61010-2-201 Second Edition
USA
Federal Commu-
nications Commis-
sion
Radio Frequency
Interference Sta-
tement
Shielded Cables
Modifications
Conditions of
Operations
Responsible party for Supplier's Declaration of Conformity
Siemens Industry, Inc.
Digital Industries - Factory Automation
5300 Triangle Parkway, Suite 100
Norcross, GA 30092
USA
mail to: amps.automation@siemens.com
CANADA
Canadian Notice
Avis Canadien

Directive WEEE

L'appareil est peu polluant, recyclable et satisfait aux exigences de la directive WEEE
2012/19/UE relative aux déchets d'équipements électriques et électroniques. Siemens AG
est enregistré auprès de la fondation sous le numéro d'enregistrement WEEE DE 23691322.
112
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
(mailto:
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
amps.automation@siemens.com)
Instructions de service, 07/2019, A5E45118483-AB
SIMATIC IPC1047

Publicité

Table des Matières
loading

Table des Matières