Installation And Connection; Operating; Prior To First Use - Bartscher Cheftoast 100.212 Mode D'emploi

5.2 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Do not place the unit near flammable or easily ignitable materials.
•
To ensure best results, make sure the device has no other objects within a space of
10 cm from its sides and 30 cm from the front and back. A space of 30 cm should
also be left above the device, e.g. between the device and the bottom of the next
shelf.
•
Place the device so that air can flow freely through the ventilation ducts.
•
Never put any objects on the toaster.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
unit directly to the wall socket; do not use any extension cords or power strips.
•
Position the device in a way so that the power plug is always accessible.

5.3 Operating

Prior to first use

•
Prior to first use, inspect the toast slots to ensure no remains of packing material nor
other objects are left inside.
•
Wash the toaster's surface with a mild cleaning agent and soft, moist cloth. Dry the
unit thoroughly.
•
During first operation the toaster may emit a strong odour or small amount of smoke.
This is a result of the use of oils during the manufacturing process and with new
units is perfectly normal.
•
Connect the unit to a single grounded outlet.
- 23 -