Technical Specification; Installation And Operation; Installation - Bartscher 100201 Mode D'emploi

4.2 Technical specification

Name
Code-No.:
Material:
Power supply:
Browning levels:
Slot size:
Dimensions:
Includes:
Weight:
We reserve the right to make technical changes!

5. Installation and operation

5.1 Installation

Positioning
•
Unpack the device and remove all packing material.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
•
Never place the device in humid or wet environment.
•
Never place the device on the flammable surfaces.
•
Never place the device at the edge of the table, it could tip or fall down.
•
The installation surface must be easily accessible and sufficiently large. In order to
enable comfortable operation e of the device and ensure good air circulation, a
minimum distance of 20 cm to all sides must be kept.
•
Install the appliance device in such manner that the plug is accessible, so that the
appliance can be quickly disconnected from the power network if necessary.
Toaster TS 20,
2 Slices
100201
0,8-0,9 kW /
220-240 V 50/60 Hz
W 190 x D 265 x H 195 mm
1 bun warmer
1 crumb drawer
1.85 kg
Toaster TS 40,
Stainless steel
1,4 kW kW /
220-240 V 50/60 Hz
1 - 7
14 x 4 cm
W 320 x D 270 x H 195 mm
2 bun warmers
2 crumb drawers
4 Slices
100202
3.1 kg
- 31 -