Installation And Connection - Bartscher 100201 Mode D'emploi

5.2 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface.
•
Do not place the toaster near combustible or easily inflammable materials.
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Make sure, that the ventilation slots can not be blocked when positioning the device.
•
Keep a minimum distance of 10 cm to both sides and 30 cm to front and back of the
device when setting it up, in order to guarantee safe operation. The top of the device
should as well have a minimum distance of 30 cm to cupboards etc.
•
The installation location should be vented properly.
•
Do not at any time place any kind of objects on top of the toaster.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
•
The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.
- 23 -