Manual Operation Button - Brother QL-650TD Guide De L'utilisateur

Manual operation button

The function of each button is shown below:
Name
Turns the printer ON or OFF. The button also lights up or blinks depending on
the printer status.
OFF
ON
ON/OFF button
Blinks rapidly
( )
Blinks slowly
Turns OFF after
blinking 10 times
Print button( ) Starts printing.
Cuts the printed label. This button is used when "Auto Cut" is set to "OFF".
Cut button( ) For details, see "Cut the roll automatically when printing: Menu 8/12" on page
30.
•
Feed
•
button( )
•
Switch between the Time Display mode (normal mode) and Menu Selection
mode (when making settings).
Menu button
ESC button The setting is canceled and the screen returns to the previous mode or screen.
OK button Accepts the selected mode or setting value.
Up/down arrow
Changes the menu or setting value.
button ( / )
LED lamp
The power is turned OFF.
The power is turned ON.
An error has occured.
For details on troubleshooting, see "Troubleshooting"
on page 48.
The printer is processing data.
A system error has occurred. Turn the printer OFF, wait
30 seconds and then turn it ON again. If this does not
clear the error you should contact your dealer or a
Brother authorised service centre.
When using DK Die-cut Labels: feeds the DK Label Roll to the beginning of
the first label. If this button is held for more than one second, the DK Label
Roll is fed to the beginning of the next label.
When using DK Continuous Tapes: feeds 25.4 mm of the DK Label Roll.
If there is no DK Label Roll installed, the mode changes to a cleaning mode
and the roller rotates for 8 mm. If this button is held for more than one
second, the roller rotates for 100 mm.
In order to avoid changing the template setting, the Menu button can be
locked. For details, see "Locking the Menu button" on page 32.
Function
Status
FRANÇAIS
15
STEP
1
STEP
2
STEP
3
STEP
4