Fermax WAY SLIM Manuel D'installation Et Utilisation page 22

3. Mounting
3.1 Monitor Mounting
1. Use the screws to fi x the Mounting Bracket on the wall, (fi tting accesories includes
a Bracket. Two screws are needed for fastening the Mounting Bracket).
2. Tie the bus (cable) to the monitor, (see in chapter 12. Installation Diagram) and
fi rmly set the monitor in the assembly support.
3.2 Outdoor Panel Mounting
1. Mounting the Rain Cover
Connect the cable correctly.
The front cover is installed
onto the base unit.
-3-
The base unit is installed
on the wall.
Use the screw to fix the front cover.
Placing name label.
Installation is complete.