CONTENTS
1. INSTALLATION...........................................................................................................................
1.1 IMPORTANT MOTICES ....................................................................................................................................................
1.2 POSITIONING ...................................................................................................................................................................
1.3 CONNECTING TO THE POWER SUPPLY ......................................................................................................................
2. OPERATING INSTRUCTIONS..................................................................................................... Pag. 8
2.2 SETTING ...........................................................................................................................................................................
DRAINING THE OIL ................................................................................................................................................................
3.1 ROUTINE MAINTENANCE ...............................................................................................................................................
3.2 SPECIAL MAINTENTANCE ..............................................................................................................................................
3.3 CONTROL AND SAFETY DEVICES .................................................................................................................................
1.
1.1 IMPORTANT NOTICES
Please read this booklet carefully because it contains important information concerning installation, operating and
maintenance safety for this appliance. Keep the booklet in a safe place so that it can be consulted by other operators.
-
Installation must be effected by professionally qualified personnel following the manufacturer's instructions.
-
The appliance can be operated only by personnel trained on how to use it.
-
Turn the appliance off in case of failure or faulty operation. If repairs are necessary, contact an After- Sales
Service Centre authorised by the manufacturer and ask for original spare parts only.
-
The safety of the appliance may be jeopordised if the above directions are not followed.
-
The appliance complies with the following standards:
- electromagnetic compatibility E.M.C. directive CEE89/336 regarding the limitation of disturbances,
- accident-prevention and fire-prevention prescriptions in force,
- standards for the installation of electric systems,
- hygiene standards.
1.2 POSITIONING
Remove the appliance from the packing, check it
for damage and place it in the installation position.
Level it and adjust its height by using the levelling
feet indicated in (Fig. 1).
If the appliance is placed against a wall, this must
be able to withstand temperatures of 80°C and if it
is not inflammable, heat insulation must be
installed. Remove the protective film from the
external panels slowly to prevent glue remnants
remaining on them.
Do not obstruct the aspiration or heat
discharge openings and gaps and place the
appliance underneath an extraction hood that
complies with current standards.
Pag. 8
Pag. 7
Pag. 7
Pag. 7
Pag. 8