Introduction; Device Description; Scope Of Delivery; Intended Use - Scheppach 5909803900 Instructions D'origine

1. Introduction

scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified.
We recommend:
Read through the complete text in the operating
instructions before installing and commission-
ing the device. If you give the equipment to any oth-
er person, give them these operating instructions as
well. The operating instructions are intended to help
the user to become familiar with the machine and
take advantage of its application possibilities in ac-
cordance with the recommendations. The operating
instructions contain important information on how to
operate the machine safely, professionally and eco-
nomically, how to avoid danger, costly repairs, re-
duce downtimes and how to increase reliability and
service life of the machine. In addition to the safety
regulations in the operating instructions, you have
to meet the applicable regulations that apply for the
operation of the machine in your country. Keep the
operating instructions package with the machine at
all times and store it in a plastic cover to protect it
from dirt and moisture. Read the instruction manual
each time before operating the machine and care-
fully follow its information. The machine can only be
operated by persons who were instructed concerning
the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with.

2. Device description

1. Handle
2. Sliding handle
3. Mounting screw sliding handle
4. Lower push bar
5. Dirt collecting container
10 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
6. Transport wheels
7. Feeder brushes
8. Belt drive
9. Sweeping brushes

3. Scope of delivery

• Feeder brushes
• Sliding handle
• Lower push bar
• Mounting screw sliding handle
• Operation manual
• Enclosed accessories bag
• Flat round screw M8 x 25mm
• Fillister head screw (self-tapping) 4,2 x 15 mm

4. Intended use

• The machine is designed and built according to the
state-of-the-art and the safety-related standards.
Nevertheless, the use of the machine might involve
risks such as personal injury, danger to life for the
user or third parties, or damage to the machine and
other material property.
• The machine is to be used only in a technically
flawless condition as well as in accordance with
the manufacturer's instructions and in a safety and
risk-conscious manner while adhering to the oper-
ating instructions! In particular, failures which may
impair the safety must be resolved immediately (by
you or an expert)!
• Sweeping of flat and dry surfaces – e.g. entries,
terraces, courtyards, etc.
• The machine may be operated only with original
parts and original accessories of the manufacturer.
• Any other use above or beyond this is considered
improper use. The manufacturer is not liable for
damages resulting from this. The user shall bear
this risk alone.
• The safety, work and maintenance instructions of
the manufacturer as well as the dimensions indicat-
ed in the Technical Data section must be adhered
to.
• The relevant accident prevention regulations and
other generally recognised safety standards must
be observed.
• The machine may be used, maintained or repaired
only by persons who are familiar with the machine
and the risks involved. Unauthorised modifications
on the machine exclude any liability of the manu-
facturer for resulting damages.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
plications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.