Placing; Placing The Speakers Using The Stands - Yamaha YHT-S300 Guide De Référence Rapide

To enjoy quality sound thoroughly, place this system in the appropriate positions, and install the components properly.
The following illustrations are the setting images of this system.
Example 1: Placing the speakers on the rack
1
1 Subwoofer integrated receiver (SR-300)
2 Speakers (NS-B380)
Notes
• Do not place this system on/under any other components such as Blu-ray disc player in a pile. The vibration of this system may cause
system failure, etc. in other components.
• Keep enough ventilation space on the front, the rear, and the bottom side (that attached legs) of this system. Do not place this system
on a thick carpet etc.
• If the picture on your CRT TV screen becomes blurred or distorted, we recommend moving the system away from your TV.
• Low frequency sound produced by the subwoofer integrated receiver may be heard differently depending on the listening position and
subwoofer location. To enjoy desired sounds, try changing the location of the subwoofer integrated receiver.
• Depending on your installation environment, connections to external components can be done before installing this system. We
recommend that you temporarily place and arrange all components in order to decide which procedure is best done first.
• Set the distance between the speakers to increase surround effect. (☞ P. 20 in Owner's Manual)

Placing the speakers using the stands

You can place the speakers in an upright position or a horizontal position.
When placing the speakers in an upright
position
Place the speaker on the stand vertically, and then secure it
with the screw as shown in the illustration below.

Placing

Example 2: Mounting the speakers on the wall
(Refer to Owner's Manual for details.)
2
When placing the speakers in a horizontal
position
Place the speaker on the stand horizontally, and then
secure it with the screw as shown in the illustration below.
2
1
3
En