Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To cool the weeder: after
having worked with the device
at high t ° (position 2) the
weeder becomes very hot, it is
suggested to slide the
communicator to position 1 (to
cool it quickly) before turning
off and to store the 'apparatus.
Storage
Make sure that the device has completely cooled
down before storing.
CLEANING AND MAINTENANCE
Before performing any work on
the equipment, pull the power
Keep the ventilation slots of the machine clean
▪
to prevent overheating of the engine.
Regularly clean the machine housing with a soft
▪
cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth
▪
moistened with soapy water.
Never use solvents such as petrol, alcohol,
▪
ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach
the inside of the power tool!
TECHNICAL DETAILS
input voltage
max. power
Air temperature -
2 positions
Air stream
cable length
Weight
Weighted root mean square acceleration according
to relevant standard. : < 1.5 m/²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
plug.
220-240 V~, 50 Hz
2000W
I : 50°C
II : 600°C
500L/min
1.8 m
0.95Kg
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-
sales service department.
_ If the power cable is damaged it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found
under:www.eco-repa.com
ELEM GARDEN TECHNIC application service team
will gladly answer questions concerning our
products and their accessories :
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity
build-up.
sav@eco-repa.com
Publicité
Table des Matières
