Switching The Telephone Muting/Attenuation Setting; Setting The Warning Tone; Setting The Automatic Opening Function - Pioneer SUPER TUNER III DEH-P9400MP Mode D'emploi

Initial Settings
S
witching the telephone
muting/attenuation setting
When a call is made or received using a cellular
phone connected to this product, the product
can be set to either mute or attenuate the audio
output.
1. With the source turned off, press and
hold 1.
2. Press MUTE.S to select the telephone
muting/attenuation mode.
3. Press MUTE.S to select the desired set-
ting.
Press MUTE.S repeatedly to switch between
the following settings:
TEL mute = 10dB ATT = 20dB ATT
Sound from this product is muted or attenu-
ated automatically when a call is made or
received using a connected cellular tele-
phone.
• "20dB ATT" has a stronger effect than
"10dB ATT", and "TEL mute" has a
stronger effect than "20dB ATT".
53
S
etting the warning tone
The warning tone sounds to remind you to
detach the front panel. (Refer to page 11.)
You can turn the warning tone function on or
off.
1. With the source turned off, press and
hold 1.
2. Press NEXT and then press DT-WRN to
select the warning tone mode.
3. Press DT-WRN to turn the warning tone
on.
"ON" appears in the display.
• Press DT-WRN again to turn the warning
tone off.
S
etting the automatic opening
function
The automatic opening function opens the front
panel to remind you to detach it. (Refer to page
11.)
You can turn the automatic opening function on
or off.
1. With the source turned off, press and
hold 1.
2. Press NEXT and then press DT-OPN to
select the automatic opening mode.
3. Press DT-OPN to turn the automatic
opening on.
"ON" appears in the display.
• Press DT-OPN again to turn the automatic
opening off.