Basic Operation
Switching the function of the multi-func-
tion buttons
The "3" indicator shows that the multi-function
buttons have functions other than those current-
ly displayed. When this indicator is visible,
press NEXT to switch through the functions of
the multi-function buttons.
• Press NEXT to display the desired func-
tions (e.g., built-in CD player).
Press NEXT repeatedly to switch between
the following functions:
Note:
• The number of functions or displays switched
through will differ according to the source or menu
selected.
• When no function is indicated for a button, that but-
ton is not currently active.
Example of multi-function button opera-
tion
Here the "random play" function of the built-in
CD player is used as an example to illustrate
operation of the multi-function buttons.
1. Press NEXT to display "FUNC".
Press NEXT repeatedly until "FUNC"
appears.
2. Press FUNC to enter the function menu.
With the switch to the function menu, the
functions of the multi-function buttons also
change simultaneously.
13
«
3. Press RDM to select the random mode.
4. Press RDM to turn random play on.
The light illuminates.
• Press RDM again to turn random play off.
The light goes off.
5. Press BACK to exit the function menu.
When the function menu is exited, the func-
tions of the multi-function buttons also
change simultaneously.
Note:
• You can also turn random play on or off by pressing
5 or ∞ in the random mode.
• If you do not operate the function within about 30
seconds, the display is automatically returned.
The difference between the BAND button
and the BACK button
BAND button
Pressing the BAND button immediately cancels
the current menu or mode, and returns to the
basic displays.
Note:
• When the source is the Tuner, TV tuner or DAB
tuner and no menu or mode is selected, pressing
the BAND button has the effect of switching bands.
BACK button
Pressing the BACK button cancels the current
menu or mode and returns to the previously
selected menu or mode.