Dometic Waeco PerfectView M55LX Instructions De Montage Et De Service page 35

PerfectView M55LX, M75LX
8.3 Setting the monitor
To set the monitor to suit your requirements, proceed as follows (fig. 0, page 6):
➤ Press the
✓ The parameters to be set appear in the following order:
Page 1: Picture
– Brightness: 0 – 100
– Contrast: 0 – 100
– Colour: 0 – 100
– Volume: 0 – 100
– Auto Dim On, Off
– Distance: distance marker setting (chapter "Setting the distance markers" on
page 37)
Page 2: Options
– Language: German, English, French, Italian, Dutch, Spanish, Portuguese, Russian
– Scale: On, Off
(switches the distance markers on or off)
– Camera 1/Camera 2/Camera 3/Camera 4: Normal or Mirrored
– Sensitivity: 1, 2
Setting of the switching threshold for the night dimmer function to avoid glare.
In dimming mode, the switching threshold can be set at two levels.
Page 3: Auto search
– Automatic search: On, Off
Switches the automatic camera panning on (the cameras are activated in preset
time intervals, e.g. for horse transporters with multi-box monitoring).
– Camera Delay: Setting of the delay intervals (2 to 20 s)
– Default: Default setting for all parameters
➤ Press the "+" button (3) or the "–" button (4) to set the required parameter.
➤ Press the "+" button (3) to increase the value of the selected parameter.
➤ Press the "–" button (4) to reduce the value of the selected parameter.
EN
button (5) to call up the required parameter.
Using the LCD monitor
35