Proline EC5FRESH Manuel D'utilisation page 9

COOL FUNCTION
Press to activate this function.
The corresponding indicator light will illuminate.
To deactivate this function, press
NOTE :
Check water level in the water tank before running the COOL function.
Make sure that water in the tank is always above the "min" water level mark.
WATER SHORTAGE ALARM
If there is insu cient water in the tank, the appliance will beep a few times and the cool indicator light will
ash.
To re ll the water tank :
1. Unplug the appliance.
2. Wait for 2 minutes before removing the water tank to allow any excess water in the honeycomb
cooling
pad to drip into the tank.
3. Fill the water tank with clean cold water up to the "max" water level mark.
4. Replace the water tank in the appliance.
NOTE :
Do not use the cool function with stale water in the tank. Empty the tank and re ll it with fresh water if
the water has been left in the tank for an extended period of time.
It is recommended to re ll the tank with fresh water at least once every two days.
again. The corresponding indicator light will go out.
The front visual water marks will
remind you when to add water.
7