Proline EC5FRESH Manuel D'utilisation page 12

Wait for 2 minutes before removing the water tank to allow any excess water in the
honeycomb cooling pad to drip into the tank.
1. Rotate the tank latch to the hori ontal position and then pull out the water tank.
2. Remove the ice boxes from the water tank.
3. Remove the water pump module.
4. Remove the water tank from the appliance and empty the tank.
5. Clean the water tank under running water using a damp cloth or a soft brush.
Descaling the Water Tank
If there is minal desposits in the water tank, fill the tank with a 50/50 solution of water
and white vinegar. Let the tank to soak for an hour or two.
Empty the tank and then you can also rinse the tank with warm soapy water.
Use brush or cloth to clean the water tank. Rinse thoroughly with clean water.
Replacing the water tank
After cleaning and descaling the water tank, make sure it is dry before replacing in the
appliance.
1. Attach the water pump module to the water tank.
Protrusion
Slot
Twist this knob.
15
10
Insert the
protrusion into the hole
on the bottom of the
water tank.
Align the knob with
the slot and then lower the
water pump module.