Proline EC5FRESH Manuel D'utilisation page 13

NOTE :
Ensure the water pump module is installed correctly, or the appliance may not work
properly.
2. Refill the tank with sufficient clean cold water up to the maximum level.
3. Slowly push the tank inside the appliance and then rotate the tank latch to the
vertical position.
Cleaning the Filter and Honeycomb Cooling Pad
It is recommended to regularly clean the filter and honeycomb cooling pad to maintain
the cooling performance and remove particles filtered from the air.
1. Remove the filter and then remove the honeycomb cooling pad.
2. Clean them with a clean cloth or a soft brush to remove all
the dust and dirt particles. If necessary, clean them under
running water. Dry thoroughly.
Rotate the latch at the bottom of the lter to
the horizontal position. Then remove the
honeycomb cooling pad.
11
Twist the knob to lock
the water pump module
in place.