Door Reversal Instructions - Danby DWC172BLPDB Manuel Du Propriétaire

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and the upper hinge
from the top right side of the cabinet. Remove
the door from the cabinet.
2. Remove the screw hole covers from the top left
side of the cabinet and install them on the top
right side of the cabinet.
3. Remove the hinge hole cover from the top left
side of the too and install it on the top right side
of the door.
4. Remove the solid foot from the bottom left side
of the cabinet. Remove the adjustable foot and
the lower hinge from the bottom right side of the
cabinet. Install the solid foot on the bottom right
side of the cabinet. Install the adjustable foot
and the lower hinge on the bottom left side of
the cabinet.
5. Install the door on the cabinet. Install the upper
hinge and the hinge cover on the top left side of
the cabinet.
Note: When reinstalling the door, ensure that the
top of the door is level with the top of the cabinet
and that the rubber gasket makes a good seal with
the cabinet all the way around.
1
2
3
4
5
5