Tecno-gaz AIR-OX Mode D'emploi page 22

RESUSCITATOR KIT
8 Fill the bottle with medical oxygen
9 Screw the reducer on the bottle by hand and pay attention that you place the manometer in vertical position (read
carefully the reducer R400 handbook before performing this operation)
10 Connect the mask (A) to the outlet of the bag' valve (F).
11 Join the end (C) of the tube (D) to the proper inlet (E) which is on the bag's underneath knob.
12 Insert the end (T) of the tube in the outlet (N) of the reducer (R) which is mounted on the bottle (Z).
13 Let the oxygen flow by turning very slowly anticlockwise the tap F of the bottle (see Fig. 4).
14 Treat the patient respecting the due rules.
FIG.4
A
DDMF121_REV6.doc
R
N
T
F
E
D
21
H
Z
C