Tecno-gaz AIR-OX Mode D'emploi page 21

OXYGEN TREATMENT KIT
7) Fill the bottle (Z) with medical oxygen
8) Screw the reducer (R) on the bottle by hand and pay attention that you place the fluxmeter in vertical position (read
carefully the reducer R400 handbook before performing this operation)
9) Connect the end (M) of the mask's (A) link tube to the outlet (N) of the reducer R400 SRPB404 (See Fig. 3).
10) Place the mask (A) on the patient's face following the mask's instructions (Fig. 3).
11) Let the oxygen flow by turning very slowly anticlockwise the tap (H) of the bottle (Fig. 3)
12) Treat the patient respecting the due rules.
FIG.3 N
R
DDMF121_REV6.doc
A
20
H
Z
M