The Different Operating Modes; Operation Of The Device; Pilot Wire Mode; Comfort Mode - Thermor SSC NF 3 Etoiles Oeil Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

THE DIFFERENT OPERATING MODES

1. OPERATION OF THE DEVICE

Press the button
displayed indicating the selected operating mode, as per the following
table:
Switch on/
Pilot wire
Standby

PILOT WIRE MODE

In "Pilot Wire" mode, the appliance is controlled by a centralised system
which defines the operating mode of all connected devices. This appliance
works with the most advanced six-control "Pilot Wire" systems which
provide the following functions:
- 1. Standby: cuts power to the heating element, while the appliance
remains active.
- 2. Comfort: maintains the user-defined "Comfort" temperature.
- 3. Eco: maintains the room temperature at 3.5° C below the "Comfort"
temperature, with a maximum temperature of 19° C.
- 4. Frost protection: maintains the room temperature at 7° C.
-5. Comfort -1: maintains the room temperature at 1° C below the
"Comfort" temperature.
- 6. Comfort -2: maintains the room temperature at 2° C below the
"Comfort" temperature.
The user can set the temperature they desire on the appliance:
- Press the button
- Adjust the temperature using the [+] and [-] buttons, then wait until the
displayed temperature stops flashing.

COMFORT MODE

- "Comfort" maintains a stable room temperature at a selected level. To
select this operating mode:
- Press the button
- Set the desired temperature.
- Use the [+] and [-] buttons.
to select the desired operating mode. An icon is
R ƒ T ¾
FP
Comfort
until the "Pilot wire" icon is displayed.
until the "Comfort" icon is displayed.
Frost pro-
Eco
tection
28
Timer/Prog
Boost

Publicité

Chapitres

Table des Matières
loading

Table des Matières