Description Of The Modes; Auto; Programme; Frost Protection - Thermor Illico 3 Notice D'utilisation

4 operating modes are available:
A
uto
-
The appliance operates to reach and maintain the Comfort set-point
temperature and automatically switches to Eco (Comfort -3.5°C) if
no presence is detected after 10 minutes, then Frost Protection (7°C)
if no presence is detected in the room for a period of 36 hours.
-
The indicator corresponding to the Comfort, Eco or Frost Protection
temperature is lit according to the information received from the
presence detector.
-
In this mode, the window open detection function can be activated or
deactivated using the MENU button.
P
rogrAmme
-
The appliance follows the modes set in the weekly programme (5 pre-
set programmes that cannot be changed).
-
The indicator corresponding to Comfort or Eco mode (temperature
set 3.5°C below Comfort) is lit according to the current day and time
setting.
-
In this mode, the window open detection function can be activated or
deactivated using the MENU button.
F P
rost rotection
-
The temperature is automatically set at 7 ± 3°C.
-
The LED corresponding to Frost Protection mode is lit.
-
In this mode, the window open detection function is deactivated.
-
The temperature cannot be altered.
B
Asic
-
The appliance operates to reach and maintain the Comfort set-point
temperature.
-
The LED corresponding to Comfort mode is lit.
-
In this mode, the window open detection function can be activated or
deactivated using the MENU button.

dESCRIPTION OF ThE MOdES

AUTO

PROG

Frost Protection

Hors Gel

BASIC

BASE
23
EN