PREPARING THE APPLIANCE'S INSTALLATION
Installation rules
- This device has been designed for installation in the home; please consult
your distributor for all other uses.
- It must be installed in accordance with accepted trade practices and
the standards in force in the country of installation (NFC 15-100 for
France).
- The appliance must be powered with a 230 V single phase 50Hz supply.
- The connection box must be installed at least 25 cm from the ground
in damp rooms such as bathrooms and kitchens.
Do not install the appliance near a draft that could affect its
temperature control (under a Mechanical Extract Ventilation
system, etc.).
Do not install the appliance directly underneath a fixed power
socket.
Volume
2
250 mini
Installation
Volume
1
Volume
0
Cotes en cm
150 mini
250 mini
200 mini
Volume 1
Volume 2
Ensure
that
between the furnishings and the appliance
is respected.
Do not install a shelf above the appliance.
The control box must be at least 5 mm
from the wall.
Avoid any danger for very young children
by installing this appliance with its lowest
heating rail at a height of at least 600 mm.
24
No electrical appliances
Electrical appliance
IPX4
(EN60335-2-43
standard: 20038A2: 2008)
the
minimum
spacing