Before First Use; Operation; Cleaning And Care - Unold 87415 Notice D'utilisation

BEFORE FIRST USE

1. Remove all packaging materials and any transport safety devices. Keep packaging material out
of reach of children. Danger of suffocation!
2. After washing your hair, dry it thoroughly with a towel.
3. Brush your hair until it falls loosely.

OPERATION

1. Prepare your hair as described in the chapter „Before first use".
2. Attach the curling brush firmly to the appliance until it latches into place.
3. Connect the plug to a wall socket.
4. Separate the combed hair into strands no more than 5 cm wide. If necessary, separate the
strands using hair clips.
5. Wrap the hair strands around the curling brush from the end to the hairline. In order not to
entangle the hair it should not be wrapped around the brush more than twice.
6. Switch the appliance on using the EIN/AUS (ON/OFF) switch and select the desired temperature.
The following settings may be selected:
0 = off
C = cool air setting to fix styling
1 = soft warm air stream for easy styling
2 = strong air stream for fast styling and drying
7. Leave the strand wrapped up until it feels warm.
8. The strand achieves more hold if you fix the styling using the cool shot.
9. Press the unroll button to easily unwrap the strand.
10. Unwrap the strand carefully to separate it from the appliance as the brush now moves freely.
11. Repeat steps 5 to 10 to style the remaining strands.
12. Always switch the appliance off using the EIN/AUS (ON/OFF) switch before disconnecting the
plug from the wall socket.
13. Before styling your hair with a comb, a brush or your fingers, let it cool for a while.
14. Please remember that the curling brush is very hot after use. Danger of burns!
Attention: The appliance becomes very hot during operation and maintains the heat during
some time after disconnection.

CLEANING AND CARE

1. Clean the appliance with a damp cloth.
16
Unplug the appliance from the wall socket.
Leave the appliance and the curling brush to cool off completely putting it on a
heat resistant surface.
Never immerse the appliance or the lead cable in water or other liquids to clean
them.
Copyright UNOLD AG | www.unold.de