Before Using The Appliance; Operation - Unold EASY TWIST 87430 Notice D'utilisation

Masquer les pouces Voir aussi pour EASY TWIST 87430:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
All manuals and user guides at all-guides.com
the manufacturer will not be liable in the event of incorrect
assembly, improper or incorrect use or if repairs are carried out
by unauthorized third parties.

BeFore uSIng the aPPlIance

1. Remove all packaging materials and transport safegu-
ards. Due to danger of suffocation, keep children away
from the packaging materials.
2. You obtain the best results with dry hair. Consequently
dry your hair thoroughly with hair dryer before using the
curler.
3. Brush your hair until it falls loosely.
4. If necessary protect your hair with a heat protection pro-
duct.

oPeratIon

1. Prepare your hair as described in the chapter "Before
using the appliance".
2. Plug the power cord into an electrical outlet.
3. Switch on the appliance via the ON/OFF switch by kee-
ping it briefly depressed. The indicator light shows that
the appliance is in operation.
4. The heat-up time is approx. two minutes.
5. Divide combed hair into small strands that should not be
more than 2 centimetres thick. If necessary separate the
hair strands with a bobby pin.
10. Leave the hair strand wrapped around the curler until the
hair strand is warm to the touch. Through curling trials,
you can quickly determine the curling time that is right
for your hair. If you leave your hair in the curler for a short
time you will have gentle curls, if you leave your hair in
the curler for a somewhat longer time you will have firm,
springy curls. The maximum time should not exceed 20
seconds, to prevent damage to your hair.
11. Open the clip again. Now you can simply remove the curl
out of the curling rail.
12. Repeat steps 6 to 10 to style the rest of the hair strands.
14
6. Open the clip and place the end
of the hair strand on the clip clo-
sure point in the lower end of the
hair rail.
7. Release the clip, the hair strand
is fixed in place.
8. Wrap the hair strand in the direc-
tion of the scalp by turning the cur-
ler to the inside.
9. If hair becomes tangled when
winding it up, turn the curler in the
opposite direction to loosen the hair
and start over again.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Easy twist 87433

Table des Matières