Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
■
Measuring tape
■
Pencil
■
No. 2 Phillips screwdriver
Parts Supplied
The microwave oven is preassembled.
■
1" (2.5 cm) mounting screws (4)
Materials needed
■
6" (15.2 cm) Anti-Tip block (installer to provide)
Minimum Installation Clearances
For proper installation, the following minimum clearances must exist above and below the cutout opening.
A
2" (5.1 cm)
2" (5.1 cm)
2
INSTALLATION REQUIREMENTS
■
Drill
■
1/16" (2 mm) drill bit
Minimum Dimensions
B
19"
(48.3 cm)
A. Upper oven
B. Lower cabinet
C. Counter
Location Requirements
The microwave oven may be located in a cabinet or below the
counter, and/or below a built-in oven. Check the opening where
the microwave oven will be installed. The location must provide:
■
Wood cabinetry.
■
Cutout opening that is plumb and square. See "Minimum
Cutout Dimensions" in "Minimum Dimensions" section.
■
Cutout floor that is solid, level and flush with bottom of
cabinet cutout.
■
Support for weight of at least 100 lbs (45.4 kg), which includes
microwave oven and items placed inside.
■
Grounded electrical outlet. See "Electrical Requirements"
section.
■
Minimum installation clearances for installation location. See
"Minimum Dimensions" section.
■
Complete enclosure around the recessed portion of the
microwave oven.
C
2" (5.1 cm)
2" (5.1 cm)
B
36"
(91.4 cm)
19"
(48.3 cm)
Publicité
Table des Matières
