CARE INTENSIVE LINE Mode D'emploi page 16

The TIME – DISTANCE – CALORIES can be cycle setting. After the target settings of TIME, DISTANCE and
CALORIES are determined, press the key "START", and this mode starts to operate.
During the exercise, press "ENTER" to switch, fix and display "SPEED - TIME – DISTANCE / RPM -
CALORIES - WATTS" screen.
During the exercise, press "PAUSE", and the program will pause. The TIME / DISTANCE / CALORIES display
will show motion data by turns.
After pause, if you want to continue the previous exercise, press "START" and the program will continue
accumulate with the TIME/DISTANCE/CALORIES data before press pause.
Press "STOP" could stop the program, and press "STOP" again will clean the exercise date and go back to
the main program selecting page for MANUAL/ PROGRAM/ USER/ HRC/ WATTS.
Dot matrix displayed messages during exercise:
During exercise, if RPM has not been reached to 30 , screen will appear twice the rolling string of "RPM↑" for
5 seconds. After the message, if the RPM still not reach to 30, program will be paused and screen will appear
twice the rolling string of "PAUSE" for 5 seconds.
3. PROGRAM graphs