CARE INTENSIVE LINE Mode D'emploi page 14

When entering the LEVEL setting but failed on setting, the user can press ENTER and convert to the next
operation setting program. There are "S-1 ~ S-16" locations in total to set; after the setting of those locations,
the machine converts to the setting program of "TIME" for operation.
During the exercise, press "ENTER" to switch, fix and display "SPEED - TIME – DISTANCE / RPM -
CALORIES - WATTS" screen.
During the exercise, press "PAUSE", and the program will pause. The TIME / DISTANCE / CALORIES display
will show motion data by turns.
After pause, if you want to continue the previous exercise, press "START" and the program will continue
accumulate with the TIME/DISTANCE/CALORIES data before press pause.
Press "STOP" could stop the program, and press "STOP" again will clean the exercise date and go back to
the main program selecting page for MANUAL/ PROGRAM/ USER/ HRC/ WATTS.
Dot matrix displayed messages during exercise:
During exercise, if RPM has not been reached to 30 , screen will appear twice the rolling string of "RPM↑" for
5 seconds. After the message, if the RPM still not reach to 30, program will be paused and screen will appear
twice the rolling string of "PAUSE" for 5 seconds.
HRP mode
Press the direction keys to select "HRP".
Press Enter to get into the target value setting page.
After press ENTER, the "HEIGHT" indicator light up and the Dot Matrix display will show "HEIGHT". The initial
value of "HEIGHT" is "170". Press direction keys to set "HEIGHT".
After the setting of HEIGHT, press ENTER, the "AGE" indicator light up and the Dot Matrix display will show
"AGE". The initial value of "AGE" is "30". Press direction keys to set "AGE".
After the setting of AGE, press ENTER, the "SEX" indicator light up and the Dot Matrix display will show
GENDER. The initial value of "SEX" is "M" as male ("F" as female). Press direction keys to set "SEX"..
After the setting of SEX, press ENTER, the "TARGET, 90%, 75%, 55%" indicator light up and at "PULSE"
display will show the initial value. Press the direction keys to select the target. TARGET could allow user to
set the target heart rate value with the direction keys. The initial value of 90%, 75% and 55% depend on the
HEIGHT, AGE and SEX setting.
After complete the setting of "PULSE", press "ENTER", the TIME indicator light up and the LED indicator light
shines on the display of "TIME". The initial value of "TIME" is "0:00". Press direction keys to set "TIME".
After the setting of "TIME", press ENTER, the DISTANCE indicator light up and the LED indicator light shines
on the display of "DISTANCE". The initial value of "DISTANCE" is "0.0". Press direction keys to set
"DISTANCE".
After the setting of "DISTANCE", press ENTER key, the CALORIES indicator light up and the LED indicator
light shines on the display of "CALORIES". The initial value of "CALORIES" is "0". Press direction keys to set
"CALORIES".
The TIME – DISTANCE – CALORIES can be cycle setting. After the target settings of TIME, DISTANCE and
CALORIES are determined, press the key "START", and this mode starts to operate.
During the exercise, press "ENTER" to switch, fix and display "SPEED - TIME – DISTANCE / RPM -
CALORIES - WATTS" screen.